|
KMID : 1038720150260010012
|
|
Progress in Medical Physics
2015 Volume.26 No. 1 p.12 ~ p.17
|
|
|
Monte Carlo Simulation of the Carbon Beam Nozzle for the Biomedical Research Facility in RAON
|
|
Bae Jae-Beom
Cho Byung-Cheol
Kwak Jung-Won
Park Woo-Yoon
Lim Young-Kyung
Chung Hyun-Tai
|
|
|
Abstract
|
|
|
|
The purpose of the Monte Carlo simulation study was to provide the optimized nozzle design to satisfy the beam conditions for biomedical researches in the Korean heavy-ion accelerator, RAON. The nozzle design was required to produce C12 beam satisfying the three conditions; the maximum field size, the dose uniformity and the beam contamination. We employed the GEANT4 toolkit in Monte Carlo simulation to optimize the nozzle design. The beams for biomedical researches were required that the maximum field size should be more than 15×15 cm2, the dose uniformity was to be less than 3% and the level of beam contamination due to the scattered radiation from collimation systems was less than 5% of total dose. For the field size, we optimized the tilting angle of the circularly rotating beam controlled by a pair of dipole magnets at the most upstream of the user beam line unit and the thickness of the scatter plate located downstream of the dipole magnets. The values of beam scanning angle and the thickness of the scatter plate could be successfully optimized to be 0.5° and 0.05 cm via this Monte Carlo simulation analysis. For the dose uniformity and the beam contamination, we introduced the new beam configuration technique by the combination of scanning and static beams. With the combination of a central static beam and a circularly rotating beam with the tilting angle of 0.5° to beam axis, the dose uniformity could be established to be 1.1% in 15×15 cm2 sized maximum field. For the beam contamination, it was determined by the ratio of the absorbed doses delivered by C12 ion and other particles. The level of the beam contamination could be achieved to be less than 2.5% of total dose in the region from 5 cm to 17 cm water equivalent depth in the combined beam configuration. Based on the results, we could establish the optimized nozzle design satisfying the beam conditions which were required for biomedical researches.
|
|
|
KEYWORD
|
|
|
Accelerator, GEANT4, Heavy ion, Carbon, Nozzle, RAON
|
|
|
FullTexts / Linksout information
|
|
|
|
|
|
Listed journal information
|
|
 
|
|