|
KMID : 0355620160420060352
|
|
Journal of Korean Association of Oral and Maxillofacial Surgeons
2016 Volume.42 No. 6 p.352 ~ p.357
|
|
|
Stability of the prosthetic screws of three types of craniofacial prostheses retention systems
|
|
Antonio Gabriel Lanata Flores
Eder Alberto Sigua Rodriguez
Goulart Douglas Rangel
Veber Luiz Bomfim Azevedo
Jose Ricardo de Albergaria Barbosa
Olate Sergio
|
|
|
Abstract
|
|
|
Objectives: This study aimed to evaluate the stability of prosthetic screws from three types of craniofacial prostheses retention systems (bar-clip, ball/O-ring, and magnet) when submitted to mechanical cycling.
Materials and Methods: Twelve models of acrylic resin were used with implants placed 20 mm from each other and separated into three groups: (1) bar-clip (Sistema INP, Sao Paulo, Brazil), (2) ball/O-ring (Sistema INP), and (3) magnet (Metalmag, Sao Paulo, Brazil), with four samples in each group. Each sample underwent a mechanical cycling removal and insertion test (f=0.5 Hz) to determine the torque and the detorque values of the retention screws. A servo-hydraulic MTS machine (810-Flextest 40; MTS Systems, Eden Prairie, MN, USA) was used to perform the cycling with 2.5 mm and a displacement of 10 mm/s. The screws of the retention systems received an initial torque of 30 Ncm and the torque values required for loosening the screw values were obtained in three cycles (1,080, 2,160, and 3,240). The screws were retorqued to 30 Ncm before each new cycle.
Results: The sample was composed of 24 screws grouped as follows: bar-clip (n=8), ball/O-ring (n=8), and magnet (n=8). There were significant differences between the groups, with greater detorque values observed in the ball/O-ring group when compared to the bar-clip and magnet groups for the first cycle. However, the detorque value was greater in the bar-clip group for the second cycle.
Conclusion: The results of this study indicate that all prosthetic screws will loosen slightly after an initial tightening torque, also the bar-clip retention system demonstrated greater loosening of the screws when compared with ball/O-ring and magnet retention systems.
|
|
|
KEYWORD
|
|
|
Maxillofacial prosthesis, Prosthesis retention, Prosthesis failure, Torque
|
|
|
FullTexts / Linksout information
|
|
  
|
|
|
Listed journal information
|
|
 
|
|