|
KMID : 0357520200430010009
|
|
Journal of Radiological Science and Technology
2020 Volume.43 No. 1 p.9 ~ p.14
|
|
|
Manufacturing a Functional Bolus Using a 3D printer in Radiation Therapy
|
|
Lee Yi-Seong
Kim Jeong-Koo
|
|
|
Abstract
|
|
|
|
Commercial plate bolus is generally used for treatment of surface tumor and required surface dose. We fabricated 3D-printed bolus by using 3D printing technology and usability of 3D-printed bolus was evaluated. RT-structure of contoured plate bolus in the TPS was exported to DICOM files and converted to STL file by using converting program. The 3D-printed bolus was manufactured with rubber-like translucent materials using a 3D printer. The dose distribution calculated in the TPS and compared the characteristics of the plate bolus and the 3D printed bolus. The absolute dose was measured inserting an ion chamber to the depth of 5 ㎝ and 10 ㎝ from the surface of the blue water phantom. HU and ED were measured to compare the material characteristics. 100% dose was distributed at Dmax of 1.5 ㎝ below the surface when was applied without bolus. When the plate bolus and 3D-plate bolus were applied, dose distributed at 0.9 ㎝ and 0.8 ㎝ below the surface of the bolus. After the comparative analysis of the radiation dose at the reference depth, differences in radiation dose of 0.1 ~ 0.3% were found, but there was no difference dose. The usability of the 3D-printed bolus was thus confirmed and it is considered that the 3D-printed bolus can be applied in radiation therapy.
|
|
|
KEYWORD
|
|
|
Bolus, Skin Sparing Effect, 3D Printing, Compensator, Skin Dose
|
|
|
FullTexts / Linksout information
|
|
|
|
|
|
Listed journal information
|
|
|