|
KMID : 0362120080300010025
|
|
Journal of Technologic Dentistry
2008 Volume.30 No. 1 p.25 ~ p.31
|
|
|
Corrosion behaviors of Cp-Ti and Ti-6Al-4V alloys by TiN coating
|
|
Lee Soon-Hyun
Ko Yeong-Mu
Choe Han-Cheol
Jeong Yong-Hoon
|
|
|
Abstract
|
|
|
|
Cp-Ti and Ti-6Al-4V alloys commonly used dental implant materials, particularly for orthopaedic and osteosynthesis because of its suitable mechanical properties and excellent biocompatibility. This alloys have excellent corrosion behavior in the clinical environment. The first factor to decide the success of dental implantation is sufficient osseointegration and high corrosion resistance between on implant fixture and its surrounding bone tissue. In this study, in order to increase corrosion resistance and biocompatibility of Cp-Ti and Ti-6Al-4V alloy that surface of manufactured alloy was coated with TiN by RF-magnetron sputtering method. The electrochemical behavior of TiN coated Cp-Ti and Ti-6Al-4V alloy were investigated using potentiodynamic (EG&G Co, PARSTAT 2273. USA) and potentiostatic test (250mV) in 0.9% NaCl solution at 36.5 1. These results are as follows : 1. From the microstructure analysis, Cp-Ti showed the acicular structure of -phase and Ti-6Al-4V showed the micro-acicular structure of phase. 2. From the potentiodynamic test, Ecorr value of Cp-Ti and Ti-6Al-4V alloys showed -702.48mV and -319.87mV, respectively. Ti-6Al-4V alloy value was higher than Cp-Ti alloy. 3. From the analysis of TiN and coated layer, TIN coated surface showed columnar structure with 800 nm thickness. 4. The corrosion resistance of TiN coated Cp-Ti and Ti-6Al-4V alloys were higher than those of the non-coated Ti alloys in 0.9% NaCl solution from potentiodynamic test, indicating better protective effect. 5. The passivation current density of TiN coated Cp-Ti and Ti-6Al-4V alloys were smaller than that of the noncoated implant fixture in 0.9% NaCl solution, indicating the good protective effect resulting from more compact and homogeneous layer formation.
|
|
|
KEYWORD
|
|
|
Cp-Ti, Ti-6Al-4V alloys, TiN coating, osseointegration, Corrosion
|
|
|
FullTexts / Linksout information
|
|
|
|
|
|
Listed journal information
|
|
|
|