KMID : 0362120150370040235
|
|
Journal of Technologic Dentistry 2015 Volume.37 No. 4 p.235 ~ p.242
|
|
Microstructure and Mechanical Properties of Co-Cr-Mo alloy for CAD/CAM Applications fabricated by Powder Metallurgy Process
|
|
Â÷¼º¼ö:Cha Sung-Soo
ÀúÀÚ¾øÀ½:No authors listed
|
|
Abstract
|
|
|
Purpose: The aims of this study are compare with microstructure and mechanical properties of Co-Cr-Mo alloys fabricated by powder metallurgy(P/M) process and casting process respectively.
Methods: Microstructure and micro-hardness were tested by SEM and Vickers Hardness Tester. The sintered specimen was produced by furnace-coolling after sintering, however the casting specimen were produced thru aircooling and water-cooling after the casting. For observation of phase transformation during sintering, DSC analyzing was carried out.
Results: Mean pore size of sintered Co-Cr-Mo alloy was 4.32§ and that of casting alloy was 1.63§. Hardness of sintered alloy was lower than water-quenched casting alloy.
Conclusion: Proper sintering temperature of Co-Cr-Mo alloy was above 1,200¡É and pore size of casting specimen were finer than sintered specimen, but hardness were similar.
|
|
KEYWORD
|
|
Co-Cr-Mo alloy, Powder metallurgy, CAD/CAM, Sintering Microstructure, Mechanical Property
|
|
FullTexts / Linksout information
|
|
|
|
Listed journal information
|
|
|