KMID : 0362120180400010027
|
|
Journal of Technologic Dentistry 2018 Volume.40 No. 1 p.27 ~ p.32
|
|
Processability study of dental zirconia block using scratch test
|
|
Kim Yung-Hoon
|
|
Abstract
|
|
|
Purpose: This study was performed to investigate processability of the dental zirconia block. Most of the CAD/CAM zirconia restorations utilize the partially sintered blocks, which are sintered at a temperature lower than 1100¡É.
Methods: Partially sintered zirconia samples were prepared 40¡¿30¡¿10 §® and surface treatment by #2000 sandpaper. Scratch hardness was determined by the procedure of ASTM G171-03 using a scratch hardness tester(KS TECH, Korea) equipped with a real time load detector to measure tangential force during scratching. The scratch rate was 30 §®/min.
Results: Scratch hardness(Hs) increases steeply with increase in the loads. The highest Hs was sampl 1.42 GPa and lowest was sample 0.42 GPa.
Conclusion : The machinability of partially sintered CAD/CAM zirconia blocks can be optivized by manipulation of
|
|
KEYWORD
|
|
CAD/CAM, Zirconia, Machinability, Scratch hardness, Mechanical property
|
|
FullTexts / Linksout information
|
|
|
|
Listed journal information
|
|
|