|
KMID : 0362419920300040508
|
|
Journal of Korean Academy of Prosthodontics
1992 Volume.30 No. 4 p.508 ~ p.525
|
|
|
A STUDY ON THE BOND STRENGTH OF RESIN-RETAINDE PROTHESIS WITH VARIOUS CAST RETAINER DESIGNS
|
|
Joo Dae-Won
Jang Ik-Tae
Kim Kwang-Nam
|
|
|
Abstract
|
|
|
The purpose of this study was to evaluate the effect of some resistance form designs oh the bond strength of resin-retained prosthesis. Six sub-groups are designed in natural teeth group and resin teeth group. The framework designs in natural teeth group: 1) no groove preparation 2) groove at the center of distal surface 3) groove at the distobuccal line angle 4) 45 degree lateral load with no groove 5) 45 degree lateral load with center groove 6) splint two teeth with no groove.
The framework designs in resin teeth group : 1) no groove preparation 2) groove at the center of distal surface 3) groove at the distobuccal line angle 4) metal covered the 1/2 of distal surface 5) metal covered the 1/2 of mesial surface 6) metal extended over the 1/4 of buccal surface. Specimens were treated electrolytic etching by Oxy-Etch and cemented with Panavia EX. Failure load was measured by Instron. Another 30 specimens were carried out fatigue tests by MTS 810 fatigue testing machine for 5000 cycles at different load level. The following results were obtained from this study.
1. The failure load was significantly increased by resistance forms.
2. The failure load was not increased by increase of total surface area bonded with teeth. The distal surface area played an important role in failure load.
3. In 45 degree lateral load group, the failure load was decreased significantly than that of n vertical load group.
4. Bond failure modes between static test and fatigue test exhibited no differences.
|
|
|
KEYWORD
|
|
|
|
|
|
FullTexts / Linksout information
|
|
 
|
|
|
Listed journal information
|
|
 
|