|
KMID : 0362420160540030193
|
|
Journal of Korean Academy of Prosthodontics
2016 Volume.54 No. 3 p.193 ~ p.202
|
|
|
Shear bond strength of dental CAD-CAM hybrid restorative materials repaired with composite resin
|
|
Moon Yun-Hee
Lee Jong-Hyuk
Lee Myung-Gu
|
|
|
Abstract
|
|
|
PURPOSE. This study was performed in order to assess the effect of the surface treatment methods and the use of bonding agent on the shear bond strength (SBS) between the aged CAD-CAM (computer aided design-computer aided manufacturing) hybrid materials and added composite resin.
MATERIALS AND METHODS. LAVA Ultimate (LU) and VITA ENAMIC (VE) specimens were age treated by submerging in a 37℃ water bath filled with artificial saliva (Xerova solution) for 30 days. The surface was ground with #220 SiC paper then the specimens were divided into 9 groups according to the combination of the surface treatment (no treatment, grinding, air abrasion with aluminum oxide, HF acid) and bonding agents (no bonding, Adper Single Bond 2, Single Bond Universal). Each group had 10 specimens. Specimens were repaired (added) using composite resin (Filtek Z250), then all the specimens were stored for 7 days in room temperature distilled water. SBS was measured and the fractured surfaces were observed with a scanning electron microscope (SEM). One-way ANOVA and Scheffe test were used for statistical analysis (α=.05).
RESULTS. Mostly groups with bonding agent treatment showed higher SBS than groups without bonding agent. Among the groups without bonding agent the groups with aluminum oxide treatment showed higher SBS. However there was no significant difference between groups except two subgroups within LU group, which revealed a significant increase of SBS when Single Bond Universal was used on the ground LU specimen.
CONCLUSION. The use of bonding agent when repairing an aged LAVA Ultimate restoration is recommended.
|
|
|
KEYWORD
|
|
|
Hybrid restorative material, Resin nano-ceramic, Polymer infiltrated ceramic network, Shear bond strength, Computer aided design-computer aided manufacturing (CAD-CAM)
|
|
|
FullTexts / Linksout information
|
|
|
|
|
Listed journal information
|
|
 
|