|
KMID : 0372919990200010107
|
|
Journal of Biomedical Engineering Research
1999 Volume.20 No. 1 p.107 ~ p.113
|
|
|
Development of Imaging Gamma Probe Using the Position Sensitive PMTube
|
|
Bong Jeong-Gyun
Gwon Soo-Il
Kim Hee-Joung
So Su-Gil
Kim Han-Myeong
Lee Jong-Du
|
|
|
Abstract
|
|
|
|
The purpose of this study was to develop a miniature imaging gamma probe with high performance that can detect small or residual tumors after surgery. Gamma probe detector system consists of NaI(Tl) scintillator, position sensitive photomultiplier tube (PSPMT), and collimator. PSPMT was optically coupled with 6.5 mm thick, 7.62 cm diameter of NaI(Tl) crystal and supplied with -1000V for high voltage. Parallel hexagonal hole collimator was manufactured for characteristics of 40-mm hole length, 1.3-mm hole diameter, and 0.22 mm septal thickness. Electronics consist of position and trigger signal readout systems. Position signals were obtained with summing, subtracting, and dividing circuit using preamplifer and amplifier. Trigger signals were obtained using summing amplifier, constant fraction discriminator, and gate and delay generator module with preamplifer. Data acquisition and processing were performed by Gamma-PF interface board inserted into pentium PC and PIP software. For imaging studies, flood and slit mask images were acquired using a point source. Two hole phantom images were also acquired with collimator. Intrinsic and system spatial resolutions were measured as 3.97 mm and 5.97 mm, respectively. In conclusion, Miniature gamma probe images based on the PSPMT showed good image quality, we conclude that the miniature imaging gamma probe was successfully developed and good image data were obtained. However, further studies will be required to optimize imaging characteristics.
|
|
|
KEYWORD
|
|
|
PSPMT, NaI(TI), Miniature Gamma Probe, Signal Processing, Spatial Resolution
|
|
|
FullTexts / Linksout information
|
|
|
|
|
|
Listed journal information
|
|
|
|
|