|
KMID : 0382420020280020117
|
|
Korean Journal of Environmental Health Society
2002 Volume.28 No. 2 p.117 ~ p.129
|
|
|
A Study on the Content Variation of Metals in Welding Fumes
|
|
Yoon Chung-Sik
Park Dong-Uk
Park Doo-Yong
|
|
|
Abstract
|
|
|
Concentration of welding fumes and their components is known to be hazardous to welder and adjacent worker. To determine the generation rates of metals in fumes, CO₂ flux cored arc welding on stainless steel was performed in well designed fume collection chamber. Variables were different products of flux cored wire(2 domestic products and 4 foreign products) and input energy(low-, optimal- , high input energy). Mass of welding fumes was determined by gravimetric method(NIOSH 0500 method), and 17 metals were analysed by inductively coupled plasm-atomic emission spectroscopy(NIOSH 7300 method), Flux cored wire tube and flux were analysed by scanning electron microscopy to determine their metal composition.
17 metals were classified by their generation rates. Generation rates of iron, manganese, potassium and sodium were all above 5Omg/min at optimal input energy level. Generation rates of chromium and amorphous silica were 25-50mg/min. At 1-25mg/min level. nickel. titanium, molybdenum, and aluminum were included. Copper, zinc, calcium, lead, magnesium, lithium, and cobalt were generated below] mg/min. Generation rates of metal components in fumes were influenced by input energy, types of flux cored wire.
Flux cored wire was consisted of outer shell tube and inner flux. Iron, chromium, and nickel were the major components of outer tube. Flux contained iron, chromium, nickel. potassium, sodium, silica, and manganese. The use of flux cored wire can increase the hazards by increasing the amounts of fumes formed relative to that of solid wire. The reason might be the direct transfer of elements from the flux, since the flux is fine power. Ratio of metals to the fume of flux cored wire was lower than that of solid wire because
non-metal components of flux were transferred. Total metal content of fumes in flux cored arc welding
was 47.4(24.3 -57.2) percent that is much lower than that of solid wire, 75.9 percent.
We found that generation rates of iron, manganese, chromium and nickel. all well known to cause work
related disease to welder, increased more rapidly with increasing input energy than those of fumes.
To reduce worker exposure to fumes and hazardous component at source, further research is needed to
develop new welding filler materials that decrease both the amount of fumes and hazardous components.
|
|
|
KEYWORD
|
|
|
|
|
|
FullTexts / Linksout information
|
|
|
|
|
|
Listed journal information
|
|
|
|
|