KMID : 1020220180180061037
|
|
Journal of Korean Society of Dental Hygiene 2018 Volume.18 No. 6 p.1037 ~ p.1045
|
|
Effect of translucency on CAD/CAM ceramic according to different core/veneer thickness
|
|
Kang Wol
Kim Ji-Hwan
|
|
Abstract
|
|
|
Objectives: The purpose of this study was to evaluation the effect of translucency on CAD/CAM ceramic according to different core/veneer thicknesses.
Methods: A total of 42 samples from 2 groups of 7 ceramic cores, each with 3 thickness values (0.8, 1.0, 1.2 mm) were manufactured. The veneers were also manufactured in 3 thicknesses (0.3, 0.5, 0.7 mm). The group names were based on the name of the ceramic core (IPS e.Max CAD; LD, and IPS Empress CAD; LR). The associated number was determined by the combined thickness of the core and veneer: 1 = (0.8 + 0.7); 2 = (1.0 + 0.5); 3 = (1.2 + 0.3). The translucency was measured using a spectrophotometer and defined via the contrast ratio (CR) and translucency parameter (TP). Two-way ANOVA was performed to compare the 2 groups (material and thickness).
Results: As the core thickness increased, the TP value also increased, and the CR value (for LR group) decreased. The results of 2-way ANOVA demonstrated that the thicknesses of different core/veneer combinations significantly affected the translucency (p<0.05).
Conclusions: The different core and veneer thicknesses affected the translucency of CAD/CAM ceramic.
|
|
KEYWORD
|
|
CAD/CAM, Spectrophotometer, Translucency
|
|
FullTexts / Linksout information
|
|
|
|
Listed journal information
|
|
|
|