Àá½Ã¸¸ ±â´Ù·Á ÁÖ¼¼¿ä. ·ÎµùÁßÀÔ´Ï´Ù.
KMID : 1024520210300020135
Journal of the Environmental Sciences
2021 Volume.30 No. 2 p.135 ~ p.143
Effect of Flocculant Injection Ratio in NIR (Near-Infrared Ray) Drying for BIO-SRF (Solid Recovered Fuel) of Swage Sludge
Lee Kang-Min

Lee Seung-Won
Abstract
This study executed evaluation of drying characteristics based on the polymer injection rate (8%, 10% and 12%) and the drying method[NIF(near-infrared ray). According to this study analyzed VS, VS/TS, and calorific value compared with ¡®the auxiliary fuel standard of the thermoelectric power plant and the combined heat & power plant¡¯. The results are as follows. In the case of NIR, the VS was slightly changed at the early stage of the material preheating period and the constant drying rate period with low moisture evaporation. But VS reduction was shown higher as moisture was dried. In the case of non-digested sludge with high VS content, the VS reduction rate by drying was shown lower than that of digested sludge. As the flocculant injection rate increased, the VS loss due th drying was found to be small. Also, the higher the flocculant injection rate was the longer the drying time. Especially, in the case of the NIR drying equipment, as the moisture content of sewage sludge decreased(moisture content 20¡­40%), the loss of net VS also showed a tendency to increase sharply. It is shown that the high calorific value according to the drying time of the non-digested sludge was changed from 590 §»/§¸ to 3,005 §»/§¸ and from 539 §»/§¸ to 2,796 §»/§¸.
KEYWORD
SRF (Solid Refuse Fuel), Sewage sludge, Flocculant injection rate, VS/TS, NIR (Near-Infrared Ray)
FullTexts / Linksout information
Listed journal information
ÇмúÁøÈïÀç´Ü(KCI)