|
KMID : 1039220170270040302
|
|
Journal of Korean Society of Occupational and Environmental Hygiene
2017 Volume.27 No. 4 p.302 ~ p.312
|
|
|
A Study on Exposure to Hazard Factors in Furnace Worker in Ferro-Alloy Manufacturer Factory Objectives: In this study, an evaluation of the working environment of furnace workers was performed and the work-relatedness of the occupational diseases were examined
|
|
Cha Won-Seok
Kim Boo-Wook
Choi Byung-Soon
|
|
|
Abstract
|
|
|
Objectives: In this study, an evaluation of the working environment of furnace workers was performed and the work-relatedness of the occupational diseases were examined
Methods: In this study, two electric furnaces at a single casting business site producing manganese-based iron alloy were selected, and occupational exposures to hazardous substances were evaluated for furnace workers and furnace worker assistants.
Results: As a result, total dust concentration were 0.407 ~ 3.001 ㎎/㎥ and respirable dust concentration were 0.196 ~ 0.584 ㎎/㎥. The highest concentration of crystalline silica was 0.079 ㎎/㎥. In the case of Masato and Sosuckwhoi crystalline silica, they contained 90.85% and 4.17% respectively. Manganese concentration was the highest at a 0.205 ㎎/㎥ maximum. The average of black carbon is 11.56 ㎍/㎥ and the maximum concentration is 604.23 ㎍/㎥. PAHs concentration was the highest at a 78.301 ㎍/㎥ of naphthalene. The concentration of carbon monoxide was 18.82 ppm(total average 3.89 ppm) during pouring, and the maximum is 131 ppm. The formaldehyde concentration was 0.003 to 0.007 ppm.
Conclusions: It seems that conditions in the past were worse, since casting has recently been performed only twice per day for about 20 minutes, reducing the amount of pouring, and local exhaust systems have been installed one-by-one. In addition, it was judged that the past exposure levels were higher considering the points measured on the back-side due to the risk of damage to the individual samples. It was found that operators could be exposed to high concentrations of crystalline silica, and that they were also exposed to high concentrations of metal(fume) and carbon monoxide during pouring. Therefore, there is a risk that occupational diseases such as lung cancer and COPD may occur with long-term work in such a process.
|
|
|
KEYWORD
|
|
|
chronic obstructive pulmonary disease(COPD), ferro-alloy, furnace worker, lung cancer
|
|
|
FullTexts / Linksout information
|
|
|
|
|
|
Listed journal information
|
|
|
|