|
KMID : 1094719990040040269
|
|
Biotechnology and Bioprocess Engineering
1999 Volume.4 No. 4 p.269 ~ p.272
|
|
|
Fluid mixing and oxygen transfer in cell suspensions ofTaxus chinensis in a novel stirred bioreactor
|
|
Pan Zhi-Wei
Zhong Jian-Jiang
Wu Jian-Yong
Takagi Mutsumi
Yoshida Toshiomi
|
|
|
Abstract
|
|
|
|
In high-density plant cell cultures, mixing and mass transfer are two key issues, which should be emphasized for process optimization. In this work, both mixing and oxygen transfer characteristics of cell suspensions ofTaxus chinensis were studied in a new centrifugal impeller bioreactor with a working volume of 1.2 L. The mixing time (t M) and the volumetric oxygen transfer coefficient (K L a) under different operational conditions were determined in both tap water and cell suspensions of 100?400 g fresh weight/L (i.e., 5.65?23.1 g DW/L). At an aeration rate of 0.1 L/min,t M decreased from 10.6s at 30 rpm to 2.89 s at 200 rpm under 100 g FW/L, and from 9.63 s (120 rpm) to 4.05 s (300 rpm) under 400 g FW/L. Compared with the effect of agitation, aeration was less significant to the suspension mixing. At a relatively high agitation speed (e.g., 200 rpm),t M remained almost the same even though aeration rate was changed from 0.1 to 0.4 L/min. Thet M value increased slowly from 3.98 to 5.26 s at 120 rpm when the cell density was raised from 100 to 250 g FW/L. A rapid increase of botht M and the suspension viscosity was observed at a cell density above 300 g FW/L. As expected, theK L a value increased with an increase of aeration rate and agitation speed, but decreased with an increase of cell density. The quantitative data obtained here are useful to investigate the effect of mixing stress on the cell physiology and metabolism ofTaxus chinensis in the bioreactor.
|
|
|
KEYWORD
|
|
|
fluid mixing, oxygen transfer, Taxus chinensis, centrifugal impeller bioreactor, plant cell culture
|
|
|
FullTexts / Linksout information
|
|
|
|
|
Listed journal information
|
|
 
|
|