|
KMID : 1137820220430040219
|
|
의공학회지
2022 Volume.43 No. 4 p.219 ~ p.229
|
|
|
Development of Micro-Ceramic Heater for Medical Application
|
|
Lee Seung-Min
Lee Kwang-Ho
|
|
|
Abstract
|
|
|
|
In this study, we propose a miniaturized micro-ceramic heater device. After screen-printing a silver paste between pre-sintered two aluminum oxide plates to integrate a heating circuit, the device was fabricated through a low-temperature sintering process. In order to configure the optimal heating circuit integration condition, the output current evaluation and heating test were performed according to the number of screen prints of the silver paste at various voltages. A silver paste-based heating circuit printed with a line width of 200 μm and a thickness of 60 μm was successfully integrated on a pre-sintered alumina substrate through a low-temperature sintering process. In the case of the 5 times printed device, the thermal response showed a response rate of 18.19 °C/sec. To demonstrate feasibility of the proposed device in the medical field, such as bio-tissue suturing and hemostasis, a voltage was applied to pig tissue in the device to test tissue change due to heat generated from the device. These results show the possibility that the proposed small ceramic heater could be used in the medical field based on its excellent tem- perature response.
|
|
|
KEYWORD
|
|
|
Aluminum oxide, Ceramic heater, Silver paste, Ag sintering, Screen printing
|
|
|
FullTexts / Linksout information
|
|
|
|
|
|
Listed journal information
|
|
 
|