|
KMID : 1151820190130040661
|
|
Journal of the Korean Society of Radiology
2019 Volume.13 No. 4 p.661 ~ p.666
|
|
|
Design of Gamma Camera with Diverging Collimator for Spatial Resolution Improvement
|
|
Lee Seung-Jae
Jang Young-Il
Beak Cheol-Ha
|
|
|
Abstract
|
|
|
|
Diverging collimators is used to obtain reduced images of an object, or to detect a wide filed-of-view (FOV) using a small gamma camera. In the gamma camera using the diverging collimators, the block scintillator, and the pixel scintillator array, gamma rays are obliquely incident on the scintillator surface when the source is located the periphery of the FOV. Therefore, the spatial resolution is reduced because it is obliquely detected in depth direction. In this study, we designed a novel system to improve the spatial resolution in the periphery of the FOV. Using a tapered crystal array to configure the scintillation pixels to coincide with the angle of the collimator's hole allows imaging to one scintillation pixel location, even if events occur to different depths. That is, even if is detected at various points in the diagonal direction, the gamma rays interact with one crystal pixel, so resolution does not degrade. The resolution of the block scintillator and the tapered crystal array was compared and evaluated through Geant4 Application for Tomographic Emission (GATE) simulation. The spatial resolution of the obtained image was 4.05 mm in the block scintillator and 2.97 mm in the tapered crystal array. There was a 26.67% spatial resolution improvement in the tapered crystal array compared to the block scintillation.
|
|
|
KEYWORD
|
|
|
Gamma camera, Diverging collimator, Tapered crystal array, GATE
|
|
|
FullTexts / Linksout information
|
|
|
|
|
|
Listed journal information
|
|
|
|