|
KMID : 0358920230500010104
|
|
Journal of the Korean Academy of Pedodontics
2023 Volume.50 No. 1 p.104 ~ p.112
|
|
|
In Vitro Study on the Bond Strength Between 3D-Printed Resin and Resin Cement for Pediatric Crown Restoration
|
|
Kim So-Yung
Shin Yoo-Seok
Kim Ik-Hwan
Song Je-Seon
|
|
|
Abstract
|
|
|
|
A 3D-printed resin crown is a novel option for esthetic crown restoration for primary teeth, which are typically bonded with resin cement. The purpose of this study was to evaluate the bonding ability of a 3D printing resin and compare it with other indirect resin materials for crown fabrication. The shear bond strengths of two 3D printing resin materials, Graphy (GP) and NextDent (NXT), and two indirect resin materials, VIPI Block (VIPI) and MAZIC Duro (MZ), were compared in the study. For all materials, the shear bond strength at the interface between the surface of the resin material and resin cement was measured. The mean shear bond strength values of GP, NXT, MZ, and VIPI were 23.29 ± 3.88, 26.14 ± 4.67, 25.41 ± 4.03, and 18.79 ± 4.26 MPa, respectively. There was no significant difference among the SBSs of GP, NXT and MZ except for VIPI. The result of this study indicates that the 3D printing resin meets the essential requirement for clinical use by showing clinically adequate bond strength.
|
|
|
KEYWORD
|
|
|
3D printing resin, Bond strength, Pediatric crown, Resin cement, Indirect resin restoration
|
|
|
FullTexts / Linksout information
|
|
|
|
|
Listed journal information
|
|
|
|